Watertight Covers and Frames
Gladiator Watertight 2 BAR D400 Cover and Frame
Description
Two Bar D400 Cover and Frame
FRAME
It is obtained from a single cast, its stability is guaranteed through a Single throat supporting area, thanks to the interposition of an EPDM gasket, this is tested and guaranteed to be watertight and can take up to 2 Bar pressure from the under face of the cover whenBolts have absolutely to be tightened with a torque of 150 Nm.
COVER
It is Round in Shape, it ensures a high stability due to a depth of insertion over 50 mm, the EPDM gasket inserted in the throat, which is located in the supporting area, and the locking system with 3 stainless steel screws. The opening process is obtained through the insertion of specific handles in the blind holes of the surface. All the covers are interchangeable. The top surface is antiskid and it allows the complete flow of water.
CHDS Range Watertight Manhole Cover and Frame
Mod. CHDS Range EN124 D400 Sealed Cover & Frame
Description
FRAME
It is obtained from a single cast, its stability is guaranteed through a double throat supporting area, creating a metal to metal coupling thanks to the interposition of an EPDM gasket, this is studied to obtain a watertight/waterproof sealing. Inside there is also a special provision to host, if necessary, the glass reinforced plate (GRP).
COVER
It is square in shape, it ensures a high stability due to a depth of insertion over 50 mm, the EPDM gasket inserted in the throat, which is located in the supporting area, and the locking system with stainless steel screws. The opening process is obtained through the insertion of specific handles in the blind holes of the surface. All the covers are interchangeable. The top surface is antiskid and it allows the complete flow of water.
TETRA Water/Pressure Tight D400 Cover/Frame Bolted
Description
FRAME
It is obtained from a single cast, its stability is guaranteed through a double throat supporting area, creating a metal to metal coupling thanks to the interposition of an EPDM gasket, this is studied to obtain a watertight sealing. Correct installation is required to Obtain Watertight Seal.
Cover
It is square in shape, it ensures a high stability due to the depth of insertion over 50 mm, the EPDM gasket inserted in the throat, which is located in the supporting area, and the locking system with Zinc screws. A Special High Security Locking system can be fitted if requested. The opening process is obtained through the insertion of specific handles in the blind holes of the surface. The Cover is non-rock due to the design of the seating and the cover being locked with four bolts to the frame. All the covers are interchangeable.
Assisted Lift available on *
Can be fitted with Stabiloc for Extra Security. ( Microsoft Stabiloc also available )
Maxum 800 D400 Watertight Cover and Frame
Mod. Maxum 800
D400 | EN-124
Manhole Cover & Frame, watertight dia 800mm, DIN EN 124 – D400.
Description
Locking
- Fastened by 5 stainless steel bolts M16
Insert
- Changeable dampening insert
- Long life, high abrasion stability for
extreme loads
Design
- Criss-cross design with optimal slide safety
Options
- Cover with ventilation hole
P-TOP® L RS Watertight/Airtight D400 Cover & Frame
Mod. D-91
D-400 | EN-124
Description
- Breaking load 40 t.
- With 3 screws.
- Lid and frame hold back water, supporting pressure of up to 1 bar.
- The frame has a polythene inner border for its perfect isolation.
- Hermetic lock with three stainless steel screws.
CHFS Range F900 Watertight Cover and Frame
Mod. CHFS F900
EN-124
Description
Frame
It is obtained from a single cast, its stability is guaranteed through a double throat supporting area, creating a metal to metal coupling thanks to the interposition of an EPDM gasket, this is studied to obtain a watertight/waterproof sealing. Inside there is also a special provision to host, if necessary, the glass reinforced plate (GRP).
Cover
It is square in shape, it ensures a high stability due to a depth of insertion over 50 mm, the EPDM gasket inserted in the throat, which is located in the supporting area, and the locking system with stainless steel screws. The opening process is obtained through the insertion of specific handles in the blind holes of the surface. All the covers are interchangeable. The top surface is antiskid and it allows the complete flow of water.
